46
Front Brake Fluid
Checking & Top-Up
1. Check the front brake reservoir level
through the sight glass.
2. Ensure that the brake uid level does
not fall below lower level mark on brake
uid reservoir, when checked with the
brake uid reservoir parallel to the
ground.
3. To top up the brake uid, remove the
cover, set plate and diaphragm.
4. Fill the reservoir to the casting edge
with brake uid from a sealed container.
Brake Fluid
Rear Brake Fluid
Checking & Top-Up
1. Check the rear brake reservoir level.
2. Ensure that the brake uid level does
not fall below lower level mark on
brake uid reservoir, when checked
with the brake uid reservoir parallel
to the ground.
3. To top up the brake uid, remove the
cover, set plate and diaphragm.
4. Fill the reservoir with brake uid from
a sealed container.
Brake Fluid
Brake Fluid Grade DOT 4
Replacement Interval 1st Replacement at 12 Months or 20,000
Kms, whichever is earlier.
Consecutive replacement at every
24 Months/ 20,000 Kms whichever is
earlier.