Maintenance and Repair
(10) Dispose in accordance with legislation for disposal and cleaning of waste products, handle
as industrial waste, and do not incinerate.
(11) If the pump ceases operation, turn power OFF (set switch to O) immediately to prevent
accidents, remove the power cord from the wall outlet, and contact your dealer or the
manufacturer for inspection and repair.
(12) Leave the pump for at least 30 minutes until it has cooled, and begin operation again.
Touching the pump immediately after it has stopped may result in burns.
(13) As the pump is not protected against entry of water, it is not guaranteed against splashing
or flooding.
Installation
(1) The pump may malfunction if it is subjected to shocks or tipped over on its side.
(2) Do not place objects on, or stand on, the pump. A malfunction may result if the pump is
handled in this manner.
(3) Float the pump from the system using a rubber shock absorber; install the pump so that
vibration is not transmitted to the system.
(4) By removing the fixed rubber legs, do not install the pump directly to the system.
There would be a case that the pump casing is deformed and a load occurs to the motor
bearing.
(5) Do not hold or push the tube at the top of the pump (see below). Damage to the tube may
affect performance of he pump.
Applications
(6) This pump is not designed to be corrosion-proof. Use it only with clean air at normal
temperature, or with gases of equivalent characteristics.
(7) Do not use the pump for pressurization (Do not use the pump with a pressurized air
supply).
(8) This pump is not designed for corrosion resistance specifications. Do not use the pump for
gas other than clean normal temperature air and gasses of equivalent property.
(9) Suction gas may leak out of the pump main unit from other area than exhaust vent. Do not
use for exhaust of toxic gas. When toxic gas is exhausted by any chance, internal pump
may be polluted by the toxic gas.
Please pay attention during maintenance work.
(10) Ingestion of liquids into the pump will result in damage and prevent proper operation.
To Next Page
Loading...
