ELECTRON-BEAM POWER SUPPLY ～HPS-1600F～
ⅰ
Introduction
Thank you for purchasing our product.
This operation manual is a guidebook in order to your using this product safely and effectively.The basic
caution matters and the operation instructions necessary for handling, and the inspection service
instructions are described. In order to prevent the significant accidents, read thoroughly the contents being
described in this operation manual, and fully understand it.
Before using this product, be sure to read this operation manual, and fully understand the
operation and the inspection service.
Do not operate this product until you understand the description of this operation manual
completely.
• Re-read the dubious points repeatedly, please make an effort so that you can use this product
correctly.
• As to the safety, since it is explained in “Precautious points on safety”(P.ii), “Safety symbol
marks” (P.ⅲ), and “Chapter 1 For your safety use”(P.1～), use the unit after fully reading and
understanding it.
• Keep this operation manual always at hand with care.
• When changing the installation place of this product, be sure to attach this operation manual
to the product.
• Due to the unit improvement, the contents of this operation manual and your using system
may be different.
• If there are dubious points and awared points, make an inquiry to our company’s exclusive
distributor.
• You are kindly requested to safely operate and correctly manage the unit.
Please acknowledge since the described contents of the operation manual may subject to change
or revise without notice due to the specification changes of the product and the improvements for
the product.
The copyrights of the operation manual and this safety guide belong to ULVAC, Inc.
Components Division.
A part and whole part of this operation manual are prohibited to copy without a permit of ULVAC,
Inc. Components Division.
Handling for this product of this operation manual and to use the manual in the application other
than that ULVAC, Inc. Components Division agreed, are prohibited.
This operation manual can not be copied or transferred for any part for the third party's use without
approval of ULVAC, Inc. Components Division.
To Next Page
Loading...