SK00-4802-DI-002-04
No.16.10.20
ix
0.4 Type/Description and position of warning label on this machine
On this machine, warning labels are attached to the points to warn. Be sure to check before
operating the pump.
High temperature
heated section
You may get burned.
Don't touch!
In the area around where this warning label is
attached, you may get an electric shock.
At the time of piping/maintenance, be sure to
turn off the power before operation.
Be sure to close the lid of the terminal box
before operation.
During the operation of this pump, the entire
body becomes high in temperature.
Do not touch the pump body when it is high in
temperature while the vacuum pump is running
or shortly after it stops.
To Next Page
Loading...
