um DSR ADVENTURE TT 125 - Reflashing; DTC Management

figure 29
19
（
5
）
DTC Management
The “DTC Management” function is used to read the DTC, and you can clear the DTC by
it, as shown in figure 28. Click the “Start” button to scan DTC, click the “Clear” button to clear
DTC.
4.4 Reflashing
figure 28
The “Reflahing” function permits to update the engine control software code into the
ECU. Click the “Reflashing” button to enter the “Reflashing” page, as shown in figure 29