UNI-T UPO3000E Series - Horizontal and Sampling Specs

Low Frequency Response
(AC coupling, -3dB)
DC Gain Accuracy
DC Offset Accuracy
Channel Isolation
≤5 Hz ( on BNC )
≤±3% (Sampling or average sampling method)
≤±3% (Sampling or average sampling method)
DC to maximum bandwidth: >40 dB
Horizontal
Timing Scale
Timing Accuracy
Delay Range
Time Base Mode
Waveform Capture Rate
2ns/div ~ 40s/div (1-2-4 base)
≤±(50+ 2×Service Life)ppm
Pre-trigger (negative delay) : ≥1 screen width; Post-trigger (positive delay) : 1s~50s
YT, XY, ROLL
200,000 wfms/s
Sampling
Sampling Mode
Real-time Sampling Rate
Acquisition Mode
Average Value
Waveform Interpolation
Memory Depth
Real-time sampling
2.5GS/s (single channel), 1.25GS/s (dual channel), 1.25GS/s (quad channel)
Sampling, peak detection, high resolution, envelope, and average
After all channels have reached N samples at the same time, the
between 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096 and 8192.
number of N can be selected
sin(x) / x
Auto, 7kpts, 70kpts, 700kpts, 7Mpts, 70Mpts optional
58