Setup/Hold Trigger
Edge Type
Data Type
Setup Time
Hold Time
Rising edge, falling edge
H, L
6.4ns~10s
6.4ns~10s
Slope Trigger
Slope Condition
Time Setting
Positive slope (greater than, less than, specified range)
Negative slope (greater than, less than, specified range)
6.4ns~10s
Video Trigger
Signal System
Frequency Range
Horizontal Scanning
Supports standard NTSC, PAL and SECAM broadcast system with line numbers ranging
from 1~525 ( NTSC ) and 1~625 ( PAL/SECAM ).
Code Trigger
Code Setting H, L, X, rising edge, falling edge
RS232 Decode (Optional)
Trigger Condition
Baud Rate
Data byte width
Start of frame, error frame, parity error, data
2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps, 115200bps, user-defined
5 bits, 6 bits, 7 bits, 8 bits
61
To Next Page
Loading...
