UNI-T
®
Uni-Trend Group Limited
UT2000_3000 Series Digital Storage Oscilloscopes Introduction
The UT2000_3000 Series Digital Storage Oscilloscope software is written for
UT2000_3000 Series digital storage oscilloscopes. With this software you can carry
out communication between a computer and an oscilloscope through serial or USB,
and in turn perform remote control. This software also provides testing, waveform and
sampling data reading functions to facilitate further signal testing and analysis.
Equipment Requirement Minimum
Oscilloscope UT2000_3000 Series
PC IBM-compatible PC, Windows 2000/XP OS, 16MB
RAM, 4X optical drive or better SVGA display or
better
RS-232 Power Cord The connection terminals of the oscilloscope and PC
must match
USB Lead
3
Uni-Trend Group Limited
. All right reserved 2007
__________________________________________________________________________________________
User Manual for UT2000_3000 Series Computer Testing & Control Software
To Next Page
Loading...
Need help?
General
