UNI-T UT2000 series

UNI-T
®
Uni-Trend Group Limited
Serial Interface Controls
Follow the following steps:
1. Select Serial with the equipment selection knob of the real-time control panel. The
following screen appears:
Press OK.
2. Click the [Equipment ON/OFF] knob to turn it on. When the indicator lights up
the function is ON. When the indicator lights off the function is OFF.
3. Click the [Data Transmission] knob to turn it on. When the indicator lights up
the function is ON. When the indicator lights off the function is OFF.
11
Uni-Trend Group Limited
. All right reserved 2007
_
__________________________________________________________________________________________
User Manual for UT2000_3000 Series Computer Testing & Control Software