UNI-T
®
Uni-Trend Group Limited
Step 10: When installation is complete as shown above, click [Finish (F)] once on the
screen. The software has been installed in your host.
If you wish to change any setup, simply click [Back (B)] once during any stage of the
wizard.
If you wish to stop the installation, click [Cancel] once during any stage of the wizard
to quit.
3. Running the Software
There are two ways to find this software and run it on your computer.
1. After finishing installation, a shortcut icon __________ appears on your desktop.
Double click this icon to run the computer testing & control software.
2. Alternatively find the software in All Programs (P) in the Start Menu. Select the
computer testing & control software and run.
27
Uni-Trend Group Limited
. All right reserved 2007
__________________________________________________________________________________________
User Manual for UT2000_3000 Series Computer Testing & Control Software
To Next Page
Loading...
Need help?
General
