Model UT50D: OPERATING MANUAL
27
Sleep Mode
To preserve battery life, the Meter automatically turns off
if you do not turn the rotary switch or press any button
for around 8 minutes. At that time, the Meter consumes
around 10µA current.
The Meter can be activated by pressing the POWER two
times.
Turning on the Auto Display Backlight
The Meter has a built-in sensor. Therefore the Display
Backlight turns on and off automatically depending on
the brightness of the environment. In a dim condition,
the Display Backlight turns on automatically while in a
bright condition, the Display Backlight turns off automatically.
To Next Page
Loading...
