Measurement Operation(11)
( figure 8)
The temperature measurement range is from -40
o
C ~1000
o
C.
To measure temperature, connect the Meter as follows:
1. Insert the red temperature into the V terminal
and the black temperature probe into the COM terminal.
2. Set the rotary switch to .
3. Place the temperature probe to the object being
measured.
The measured value shows on the display.
l The Meter automatically displays the temperature
value inside the Meter when there is no temperature
probe connection.
l The included temperature probe can only be measured
up to 250 . For any mesaurement higher than that,
the rod type temperature probe must be used instead.
23
Model UT50D: OPERATING MANUAL
To Next Page
Loading...
