51
Model UT81B: OPERATING MANUAL
l The specification is same as Hi. Under Multimeter mode, press RANGE button to toggle between frequency
and duty cycle mode.
l On the top right corner of the display shows the waveform’s RMS value, for reference only. When the LCD
displays 1-10 period waveform cycle or the peak-peak difference value is greater than 1/3 div, the reading is valid,
otherwise the Meter displays “ ————“
40nF
400nF
4µF
40µF
100µF
250V DC or AC rms
Range Resolution Accuracy Overload Protection
10pF
100pF
1nF
10nF
100nF
Under REL mode: (3%+10)
(3%+8)
(4%+8)
I. Capacitance
To Next Page
Loading...
