6
Contents
A SAFETY INFORMATION .........................................................................................................................7
A.1 General information ......................................................................................................................7
A.2 General safety .............................................................................................................................7
A.3 Personal protection equipment ........................................................................................................ 8
A.4 Transport, handling and storage ...................................................................................................... 8
A.5 Installation and assembly ............................................................................................................... 9
A.6 Water connection.......................................................................................................................... 9
A.7 Electrical connection ..................................................................................................................... 9
A.8 Use ......................................................................................................................................... 10
A.9 appliance cleaning and maintenance .............................................................................................. 10
A.10 Service..................................................................................................................................... 10
A.11 Disposal of packing..................................................................................................................... 10
A.12 Machine disposal........................................................................................................................ 11
B WARRANTY TERMS AND EXCLUSIONS................................................................................................. 11
C GENERAL SAFETY RULES................................................................................................................... 11
C.1 Introduction ............................................................................................................................... 11
C.2 Mechanical safety characteristics, hazards....................................................................................... 11
C.3 Protection devices installed on the machine ..................................................................................... 11
C.4 Main switch ............................................................................................................................... 11
C.4.1 Appliance with 3 positions main switch................................................................................... 12
C.5 Safety signs to be placed on the machine or near its area.................................................................... 12
C.6 Instructions for use and maintenance.............................................................................................. 12
C.7 Reasonably foreseeable improper use ............................................................................................ 12
C.8 End of use ................................................................................................................................ 12
C.9 Residual risks ............................................................................................................................ 12
D GENERAL INFORMATION .................................................................................................................... 13
D.1 Introduction ............................................................................................................................... 13
D.2 Definitions................................................................................................................................. 13
D.3 Machine and manufacturer's identification data ................................................................................. 13
D.4 Additional indications................................................................................................................... 14
D.5 Responsibility ............................................................................................................................ 14
D.6 Copyright.................................................................................................................................. 14
D.7 Keeping the manual .................................................................................................................... 14
D.8 Recipients of the manual .............................................................................................................. 14
E NORMAL USE .................................................................................................................................... 14
E.1 Characteristics of personnel enabled to operate on the machine ........................................................... 14
E.2 Characteristics of personnel trained for normal machine use ................................................................ 14
E.3 Operator qualified for normal machine use ....................................................................................... 14
F TECHNICAL CHARACTERISTICS .......................................................................................................... 15
F.1 Data table ................................................................................................................................. 15
G OPERATING....................................................................................................................................... 15
G.1 Switching on.............................................................................................................................. 15
G.2 Keyboards ................................................................................................................................ 15
G.2.1 4 doses box ..................................................................................................................... 15
G.2.2 Dosamat box.................................................................................................................... 16
G.3 How to prepare a cappuccino ........................................................................................................ 16
G.4 Programming............................................................................................................................. 16
G.4.1 Access to parameter .......................................................................................................... 16
G.4.2 Coffee doses.................................................................................................................... 16
G.5 Ambiance lighting ....................................................................................................................... 16
H DAILY CLEANING................................................................................................................................ 16
H.1 Cleaning groups ......................................................................................................................... 16
H.1.1 Launching of cleaning volunteer ........................................................................................... 16
H.1.2 Launching of cleaning after group blocked .............................................................................. 17
H.2 External cleaning........................................................................................................................ 17
I MAINTENANCE .................................................................................................................................. 17
I.1 Maintenance intervals.................................................................................................................. 17
I.1.1 Preventive Maintenance ..................................................................................................... 17
I.2 Softener ................................................................................................................................... 17
I.3 Machine disposal........................................................................................................................ 17
J STEAMAIR OPTION............................................................................................................................. 17
J.1 Introduction ............................................................................................................................... 17
J.2 Components.............................................................................................................................. 17
J.3 Use ......................................................................................................................................... 18
J.3.1 Automatic mode (To reach the programmed T℃) ..................................................................... 18
J.3.2 Manual mode (Over the programmed T℃).............................................................................. 18
J.4 Programming............................................................................................................................. 18
J.4.1 Small hot water delay time adjustment ................................................................................... 18
J.4.2 Large hot water delay time adjustment................................................................................... 18
J.4.3 Steam delay time adjustment............................................................................................... 18
J.4.4 Steam temperature adjustment ............................................................................................ 18
To Next Page
Loading...
Need help?
General
