Unic Tango ST SOLO - Access Level; CIM

26
►CIM
Note: level 2 required to change.
Permits access and/or changes to the machine’s characteristics,
such as:
Type of machine SOLO ST DUO ST
Grinders
Purple X X
Orange X
Green X X
Pre-infusion X X
Left milk system
None X X
LC X X
Pompe X X
Right milk system
None X
LC X
Pump
Self mode X X
Water tank X X
Milk level sensor X X
Milk temperature sensor X X
Hot water X X
Steam X X
Decaf X X
Hydraulic system
Basic X X
with EViNF X X
►Access level
Most menus are locked by default. Various settings and programs
are inaccessible. Access to settings is enabled by entering a
code according to two access levels.
To change a code, tap the settings icon, enter the new password
then conrm to save the change.