UniCarriers FD30T3C - Page 138

SAFETY DEVICE AND OTHERS
Checking
item
Service Required Tools Daily
Monthly
(200 hrs)
Trimonthly
(600 hrs)
Semiannually
(1200 hrs)
Annually
(2400 hrs)
Overhead
guard
and load
backrest
Check for loose mounting.
Test
hammer
○ ○ ○ ○ ○
Check for deformation, cracks or damage. Visual
○ ○ ○ ○ ○
Turn signal
Check for operation and installation. Check for
damage or contamination.
Operate/
visual
○ ○ ○ ○ ○
Alarm Check for operation and installation. Operate
○ ○ ○ ○ ○
Lights
Check for operation and installation. Check for
damage or contamination.
Operate/
visual
○ ○ ○ ○ ○
Back-up
alarm
Check for operation and installation. Operate
○ ○ ○ ○ ○
Sideview
mirrors
Check for contamination or damage. Visual
○ ○ ○ ○ ○
Check for proper visibility. Visual
○ ○ ○ ○ ○
Warning
lights,
meters
Check for operation. Operate
○ ○ ○ ○ ○
Rear
reector/
License
number
plate
Check for contamination or damage. Visual
○ ○ ○ ○ ○
Operator’s
seat
Check for damage or loose mounting bolts. Visual
○ ○
Check seat belt for operation and damage.
Visual &
Operate
○ ○ ○ ○ ○
Truck body
Check frame and cross members for damage or
cracks.
Visual
○
Check for loose rivets and bolts.
Test
hammer
○
Check the results of previous checks. Visual
○ ○ ○ ○ ○
Check general condition of truck. Visual
○ ○ ○ ○ ○
Lubricants
and oil
change
After cleaning, check for lubrication of each
part.
Grease
pump
● ● ● ●
Check condition of lubricants. Check
○
4-47
PERIODIC INSPECTION