When leaving the truck, observe the
following conditions:
1) Park the truck on an out-of-traffic area and
lower the forks on the ground.
2) Tilt the mast a little forward and make the fork
tips in contact with the ground surface.
3) Apply the parking brake.
Engine-powered trucks
4) Place the shift levers (direction and speed
range) in neutral.
5) Turn the key switch to the OFF position to shut
off the engine.
6) Remove the key.
Electric trucks
4) Place the directional control lever in neutral.
5) Turn the key switch OFF.
6) Remove the key.
To Next Page
Loading...
