To Next PageTo Next Page
Need help?Do you have a question about the UNICORECOMM UM960 and is the answer not in the manual?
General| Operating Temperature | -40°C to +85°C |
|---|---|
| Operating System | Linux |
| Memory | 512 MB DDR3 |
| Storage | 8 GB eMMC |
| USB Ports | 2 x USB 2.0 |
| Digital Inputs | 4 |
| Digital Outputs | 4 |
| Power Supply (Control Unit) | 9-36V DC |
| Operating Temperature (Control Unit) | -40°C to +85°C |
| GNSS | GPS, GLONASS, Galileo, BeiDou, QZSS |
| Data Format | NMEA-0183 |
| Interfaces | Ethernet, USB, Serial |
| Power Supply (GNSS) | 3.3V DC |
| Processor | ARM Cortex-A |
| Ethernet | 10/100 Mbps |
Highlights the main capabilities of the UM960 GNSS module, including precision, size, and power.
Details technical parameters such as channels, constellations, frequency support, power, and accuracy.
Describes the available communication interfaces and signal pins for the UM960 module.
Provides the physical dimensions and tolerances of the UM960 module in a table and diagram.
Details each pin's number, I/O type, and function for the UM960 module.
Specifies the extreme electrical limits for voltage, current, and temperature for safe operation.
Defines the recommended operating parameters for voltage, current, and temperature for the UM960 module.
Outlines the voltage levels for digital inputs and outputs for proper signal interpretation.
Specifies the optimal gain required for the antenna to ensure proper signal reception.
Presents a reference circuit for connecting the antenna to the UM960 module, including component recommendations.
Explains the importance of grounding pads for heat dissipation and signal integrity in PCB design.
Details the voltage level requirements and timing for VCC and V_BCKP during power transitions.
Illustrates the recommended lead-free soldering temperature profile with specific stages and timings.
Provides important considerations and recommendations for the soldering process, including paste and stencil.
Describes the product model, part number, and serial number markings on the module label.
Explains the carrier tape and reel packaging, vacuum sealing, and moisture control for the UM960 module.
Details the reel size, carrier tape dimensions, and shelf life of the UM960 module.
