Need help?Do you have a question about the UNICORECOMM UM980 and is the answer not in the manual?
General| Positioning accuracy (RTK horizontal) | 8 mm + 1 ppm |
|---|---|
| Positioning accuracy (RTK vertical) | 15 mm + 1 ppm |
| Data update rate | Up to 20 Hz |
| Operating temperature | -40°C to +85°C |
| GNSS support | GPS, GLONASS, BeiDou, Galileo, QZSS |
| Communication interfaces | Ethernet, USB, UART, CAN |
| Operating voltage | 3.3 V DC |
| Power consumption | 2.5 W |
Details about the initial release of the user manual.
Specific changes made in revision R1.1 of the manual.
Identifies the intended audience for the manual.
Highlights the main capabilities and advantages of the UM980 module.
Lists the essential technical parameters of the UM980 module.
Visual representation of the UM980 module's internal architecture.
Specifies the accuracy achieved in single-point positioning mode.
Details the accuracy achieved using Differential GPS.
Specifies the accuracy achieved with Real-Time Kinematic positioning.
Accuracy for pseudorange measurements across specific GNSS signals.
Accuracy for carrier phase measurements across specific GNSS signals.
Accuracy for pseudorange measurements across other GNSS signals.
Accuracy for carrier phase measurements across other GNSS signals.
Accuracy for pseudorange measurements across additional GNSS signals.
Accuracy for carrier phase measurements across additional GNSS signals.
Specifies the accuracy of the time pulse output signal.
Details the accuracy of velocity measurements provided by the module.
Indicates the time required for the module to achieve an initial position fix.
Specifies the type of package used for the UM980 module.
Provides the physical size measurements of the UM980 module.
States the weight of the UM980 module.
Specifies the acceptable range of temperatures for operation.
Specifies the acceptable range of temperatures for storage.
Details the module's resistance to humidity.
Describes the module's ability to withstand vibration.
Describes the module's ability to withstand shock.
Details the Universal Asynchronous Receiver/Transmitter ports.
Describes the Inter-Integrated Circuit communication interface.
Describes the Serial Peripheral Interface communication interface.
Describes the Controller Area Network communication interface.
Detailed mechanical dimensions for module integration.
Explains the function of each pin on the module.
Specifies the extreme limits for electrical parameters.
Defines the recommended conditions for reliable operation.
Details the voltage levels for input/output signal interpretation.
Describes characteristics related to the antenna connection.
Shows a basic reference circuit for the UM980 module.
Recommendations for designing the antenna feed circuit.
Recommended temperature curve for the rising phase of soldering.
Recommended temperature curve for the preheating phase of soldering.
Recommended temperature curve for the reflux phase of soldering.
Recommended temperature curve for the cooling phase of soldering.
Details the information present on the module's product label.
Describes the carrier tape, reel, and bag specifications.
To Next Page
