Why are radio transmissions cutting in and out in Highway mode on my Uniden Scanner?
If radio transmissions (conversations) are cutting in and out in Highway mode on your Uniden Scanner, the priority system is likely checking for alarms. Use HOLD/RESUME to hold on a frequency without checking priority channels every two seconds. You can also select Priority off mode or Priority only mode.
General| Belt clip | No |
|---|
Weight and Dimensions| Weight | 1360 g |
|---|---|
| Dimensions (WxDxH) | 228 x 101 x 330 mm |
Step-by-step guide for setting up the scanner for home use.
Instructions for installing the scanner in a vehicle.
Specifics on connecting the scanner to a vehicle's DC power source.
Basic steps to power on and initialize the scanner.
How to choose a specific state for Highway Patrol scanning.
Steps to initiate scanning of pre-programmed Highway Patrol frequencies.
Step-by-step guide to storing frequencies into scanner channels.
How to initiate scanning of programmed private channels.
How to select a specific frequency range for searching.
First step to program a trunking system by selecting its type.
Second step to program the actual frequencies for a trunking system.
Guide to programming talk group IDs and organizing them into scan lists.
How to scan programmed talkgroup IDs within trunked systems.
How to search for all active IDs within a trunked system.
Explains how the scanner handles multiple trunked systems simultaneously.
How TrunkTracker III handles EDACS trunked radio systems.
Critical steps for correctly programming EDACS frequencies for tracking.
How the scanner tracks LTR (Logic Trunked Radio) systems.
Explains the differences and tracking methods for Motorola Type I and Type II systems.
How to choose from pre-programmed fleet maps for Type I/Hybrid systems.
Steps to create and program custom fleet maps.
Essential parameters for accurately tracking Motorola VHF/UHF trunked systems.
To Next Page
