Changing the Volume
You can set the earpiece volume on each handset. Anytime you are
listening to the earpiece, press
up
to increase the volume and
dOwn
to
decrease it.
You can also set the ringer volume separately: when the phone is in
standby, press
up
to increase the ringer volume and
dOwn
to decrease.
If you turn the ringer volume all the way down, the ringer turns off.
Using the Caller ID and Redial Lists
Caller ID
(CID) is a service available from your telephone provider t
hat
shows the phone number (and sometimes the caller’s name) of incoming
calls.
Contact your telephone provider for more information.
Caller ID list Redial list
When a call comes in, the phone displays the -
number and name (if available) of the caller.
The phone saves the information for the last 30 -
received calls to the CID list.
When it’s in standby, the handset shows how -
many calls came in since the last time you
checked the CID list.
Each handset -
remembers the
last 5 numbers
you dialed on it.
The redial list is
separate for each
handset.
All handsets share the CID list; only one handset can access #
the CID list at a time.
To… Follow these steps:
Open the CID list Press
CallER Id/RIgHT
.
Open the redial list
REdIal/pausE.
Scroll through the
lists
Press
dOwn
to scroll from newest to oldest.
Press
up
to scroll from oldest to newest.
Dial a number from
the lists
Highlight the number you want and press
Talk/flasH
.
Close the lists Press
pHOnEbOOk/lEfT
.
To select a number, highlight the number and press
MEnu/sElECT
. The
phone gives you the following options:
To Next Page
Loading...
Need help?
General
