Uniden DECT1015 User Manual

14
To... Follow these steps:
make an intercom
page
Press 1.
HOld/ClEaR/InTERCOM .
Select the handset you want to talk with, or 2.
All to page all handsets at the same time.
cancel a page Press
End .
answer an intercom
page
Press
HOld/ClEaR/InTERCOM or Talk/flasH .
end an intercom call Press
End . Both handsets return to standby.
Call Transfer
To... Follow these steps:
transfer a
call
Press 1.
HOld/ClEaR/InTERCOM to put the call on hold.
Select the handset you want to page (select 2. All to
page all handsets at the same time).
When another handset accepts the call, you'll be 3.
disconnected (press
Talk/flasH to rejoin the call).
cancel a
transfer
Press
Talk/flasH to return to the call.
accept a
transferred
call
To answer the page and speak to the transferring 1.
handset using the intercom, press
HOld/ClEaR/InTERCOM.
To speak to the outside caller, press 2. Talk/flasH .
Voice Message Nocaon
If you subscribe to a voice mail service, your phone can notify 
you when you have a new message waiting. This feature supports
Frequency-Shift Keying (FSK) message notification. Contact your
voice mail provider for information.
When you have new messages, the voice message icon appears in 
the display, and the
sTaTus light on the handset blinks.
After you listen to your messages, the voice message icon turns off. 
If it doesn’t, you can reset it: With the phone in standby, open the
menu and select Global Setup; select VMWI Reset, then select Yes.

Uniden DECT1015 Specifications

General

Brand	Uniden
Model	DECT1015
Category	Cordless Telephone
Language	English