Handset Setup
Menu
You can change these settings separately for each handset.
T-coil
Turn on T-coil mode to reduce noise on some hearing
aids (for more details, see page 16).
Ringer Tones
Choose this handset's ring tone. As you highlight each
ring tone, the phone plays a sample. When you hear
the tone you want, press
MEnu/sElECT
.
AutoTalk
Have this handset answer a call when you pick it up
from the cradle (without pressing any buttons).
Any Key
Answer
Have this handset answer a call when you press any
key on the 12-key dialpad.
Banner Change the name used on the handset's display.
Key Touch Tone Have the keypad sound a tone when you press a key.
Day & Time
Menu
Use this menu to set the clock manually. (If you have Caller ID, the
phone sets the day and time from the CID data.) Select the day of week,
then use the number keypad to enter the hour and minutes in HHMM
format (e.g., enter 0345 for 3:45). Then, select AM or PM.
Global Setup
Menu
The settings on this menu affect all handsets. Only one handset at a
time can change these menu options.
Insert 0
Adds “0” or “00” to the beginning of the number
received from Caller ID. The default setting is ON for
New Zealand and OFF for Australia.
VMWI Reset
Reset your Visual Message Waiting Indicator to
bring it back in sync with your voice mail service.
Entering Text on Your Phone
Use the 12-key dial pad when you want to enter text into your phone
(a name in the phonebook, the handset banner, etc.).
The phone defaults to a capital letter for the first letter and any
letter after a space; otherwise, it uses small letters.
To Next Page
Loading...
Need help?
General
