Connecting the AC adapter
To the base
To avoid risk of re and shock, only use the Uniden AAD-041S(M) AC adapter with the base.
To the charging cradle (for multi-handset packs only)
Use only the Uniden AAD-600S(M) AC adapter with the charging cradle.
Connect the AC adapter to the
DC IN 9V jack on the bottom
of the base.
Connect the AC
adapter to a
standard 240V
AC wall outlet.
Route the cord
through the
molded wiring
channel.
Don’t put any power cord where it people might trip
over it or step on it. If a power cord becomes chafed
or worn out, it can create a fire or electrical hazard.
Place the cord
through the molded
wiring channel.
Connect the AC
adapter to a
standard 240V
AC wall outlet.
DSS8955 OM.indb 7 28/7/08 5:20:41 PM
To Next Page
Loading...
Need help?
General
