What to do if the outgoing message is deleted after a power failure on Uniden EXAI5680?
If the outgoing message on your Uniden Cordless Telephone is deleted after a power failure, record your personal outgoing message again. The default message should remain.
General| Caller ID | Yes |
|---|---|
| Call Waiting | Yes |
| Intercom | Yes |
| Headset Jack | 2.5mm |
| Backlit Display | Yes |
| Frequency | DECT 6.0 |
| Answering System | Digital |
| Speakerphone | Yes |
| Power Source | AC Adapter |
| Type | Cordless Telephone |
Details main phone and answering machine capabilities.
Identifies and explains buttons and displays on the handset and base.
Guides on choosing a location, installing the base and handset battery.
Covers setting AutoTalk, Caller ID, Area Code, Dial Mode, and Language.
Explains how to configure time, PIN, ring time, record time, and alerts.
Instructions for storing and using speed dial numbers and Caller ID.
Guides on making, receiving, redialing calls, and using call waiting.
Adjusting earpiece volume, ring tone, and temporarily muting the ringer.
Changing channels for interference and switching between tone/pulse dialing.
Configuring time, PIN, ring time, record time, alerts, and language.
Recording greetings, conversations, voice memos, and reviewing/deleting messages.
Operating the answering machine remotely via phone or handset.
Changing digital security code, specifications, talk/standby times, and battery info.
Solutions for common problems like no display, weak audio, or non-working features.
Safety warnings, FCC/IC compliance, liquid damage, and warranty information.
To Next Page
