Uniden UHF, Marin Radios & Scanners Resetting Procedure
Updated on 04/11/2016
UHF Radios:
Model No: UH011
Turn the unit off, Press and hold “TSQ” & “DUP” buttons together at the same time and turn the
power back on. After 15 seconds turn power back off then turn on
Model No: UH012SX
Turn the unit off, Press and hold “INST” & “DUP” buttons together at the same time and turn the
power back on. After 15 seconds turn power back off then turn on.
Model No: UH013SX
Turn the unit off, Press and hold “INST (SET/SKIP)” & “SQ” buttons together at the same time
and turn the power back on. After 15 seconds turn power back off, then turn on.
Model No: UH015SX
Turn the unit off, Press and hold DCS/CTCSS” & “POL(MEM)” buttons together at the same
time and turn the power back on. After 15 seconds turn power back off, then turn on.
Model No: UH035
Turn the unit off, Press and hold “DUP” & “MON” buttons together at the same time and turn
the power back on. After 15 seconds turn power back off, then turn on
Model No: UH036/UH035-2
Turn the unit off, Press and hold “[channel▲] and [vol▲]” buttons together at the same time and
turn the power back on. After 15 seconds turn power back off, then turn on.
Model No: UH037
Turn the unit off, Press and hold “DUP” & “MON” buttons together at the same time and turn
the power back on. After 15 seconds turn power back off, then turn on
Model No: UH037SX-NB
Turn the unit off, Press and hold “[channel▲] and [ vol ▲]” buttons together at the same time
and turn the power back on. After 15 seconds turn power back off then on
To Next Page
General
