50
8.12. How to generate Server Certificate, not needed for OSBiz Circuit Connector
!Not needed for Circuit configuration! See also Chapter “Circuit connectivity, Certificate Error”
For Secure Networking Trunk Connection in OSBiz (not Circuit connectivity) you need a Server Certificate, or if SPE (Signaling and
payload encryption) Checkbox is enabled in OSBiz.
Here you will find the description how to generate a CA Certificate with OSBiz.
Precondition is Name, Serial Number and Applicant to create, also to check Data (valid)
You have to proceed with the following Steps:
Fill out Data
Generate Certificate PKCS#12
To generate the certificate, following is needed:
Passphrase:
Same Serial Number as in first Step
Subject name, must be different from first step
After press Generate, Certificate will be stored on your PC.
To Next Page
Loading...
Need help?
General