Unify Openstage 15, 20, 40 & 60 manual
A. Initial operation
1. Requirements and Information
Initial operation requires an nfon Deployment PIN . This is "40001998". A connection to the
telephone system can only be established after entering this PIN. This PIN is only required once,
during initial operation. When restarting the phone at a future time the PIN is already saved and
does not need to be reentered.
• Using a Unify OpenStage SIP phone with the NFON
telephone system requires a V3 R1.21. or V3 R1.38.
firmware or later.
• When purchasing phones from NFON we can
guarantee a compatible firmware is preloaded.
• Unify OpenStage phones are available in 3 versions.
The standard sold by nfon is the "SIP" version.
Customers who already own "HFA" OpenStage
phones can ensure these are compatible by
performing a firmware update. OpenStage "TDM"
models are not supported by nfon.
• When using the phone for the first time an NFON
Deployment PIN must be entered to establish a
connection to the nfon telephone system. For more
details please refer to A. Initial operation / 1.
Requirements.
• There is currently no access to the main directory
To Next Page
Need help?
General
