The call is now active again.
1.6. Call waiting and switch calls
You are in a call.
A second call is coming in. The phone display will now show various options.
- Using the navigation keys please select "Accept?" and confirm with [OK].
- Pressing "Accept?" will now place the active call on “hold” and the second call is active.
The display will now show additional options.
- Use the navigation keys to select "Switch calls?" and confirm with [OK].
- The second call is now on “hold” again and the call with the first caller is active again.
- To end a call, while a call is active please select the option "Disconnect & return?" from the
phone display using the navigation keys and confirm with [OK].
1.7. Conference call
Start a Three-Way-Conference following these steps:
- Call party 1.
- Once party 1 is on the line the phone display will show various options. Using the navigation
keys please select "Start conference?" and confirm with [OK].
- Now enter the phone number for party 2 and confirm with [OK]. Wait for party 2 to answer.
- The display will now show additional options. Use the navigation keys to select
"Conference?" and confirm with [OK].
Þ The conference call is now active.
-
To end the conference select "End conf?" using the navigation keys and confirm with [OK].
A conference call with more
than 3 parties can easily be set
up on the administration portal:
Please refer to the
administration portal manual for
this purpose.
1.8. Attended call transfer
1. During an active call the phone display will show various options. Using the navigation
keys please select Announce? and confirm with [OK].
To Next Page
Loading...
Need help?
General