42 Conducting calls – with multiple users
Second call (call waiting)
If the call waiting function is set up, you can accept second calls on your hand-
set.
When a second call is incoming (call waiting), you will be informed of the second
call during a call by a call waiting tone and a message on the display. The caller
hears a ringing tone. You can decide whether to accept or reject the second call.
You can activate and deactivate second calls. If the function is deactivated, the
second caller hears a busy tone or is forwarded to another number.
Activating call waiting
u Press the INT key.
> < [ Select the menu item and confirm.
> < [ Select the menu item and confirm.
> < [ Select the menu item and confirm. The display shows "activated".
a Press the On-hook key to end the operation.
To deactivate, repeat the procedure.
Placing the call on hold, accepting the second call
p You are on a call and hear the call waiting tone.
Open the system menu.
> < [ Select the menu item and confirm. You are connected to the second caller. The
first call is now on hold.
You can now:
• Transfer the call Page 40
• Toggle between calls
Page 40
• Initiate a conference
Page 41
To Next Page
Loading...
Need help?
General