Additional functions 53
Registering Bluetooth devices
The distance between the handset in Bluetooth mode and the activated Blue-
tooth device (headset or data device) should be no more than 10 m.
To connect a Bluetooth headset, see Page 27.
If the Bluetooth connection is not yet established between the handsets, perform
the following steps:
Searching on your handset
v Open the handset's main menu.
u v [ Select the menu icon and confirm.
s t [ Select the menu item and confirm. The handset searches for Bluetooth-enabled
devices. This may take a few minutes. If devices are found, these will be shown
in a list.
s t Select the required device, for example, the other handset.
Trusting the device
Press the display key.
s t [ Select the menu item and confirm.
s t [ Enter the Bluetooth PIN and confirm (default: 0000). The device is saved in the
list of known devices.
Cancelling/repeating current search
Press the display key to cancel the search.
or
Press the display key.
s t [ Select and confirm the menu item in order to repeat the search.
To Next Page
Loading...
Need help?
General