Unison Research S6 User Manual

Cleaning the unit should take place only when it is switched
off and the valves are cold.
Use a soft dry cloth. Do not use solvents or alcohol based
detergents.
Do not rub hard when cleaning the printed lettering.
Never operate the unit if it is covered !
Never attempt to remove the valves when the unit is
switched on !
If you need to remove and replace the valves, do so only
when the valves are cold and the unit is switched off.
Replace valves only with others of the same type, preferably
in matched pairs.
Avoid shocks and vibration to the unit, which can damage
or reduce the life of the valves.

Unison Research S6 Specifications

General

Type	Integrated Amplifier
Amplifier Class	Class A
Frequency Response	20 Hz - 30 kHz
Weight	25 kg
Input Impedance	47 kOhms
Signal to Noise Ratio	90 dB
Output Transformer	Unison Research
Speaker Outputs	4, 8 Ohms
Power Consumption	265W
Inputs	4 x Line (RCA)