EasyManuals Logo

Unison Research S6 User Manual

Unison Research S6
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
SWITCHING OFF THE UNIT
After switching off the unit, wait around 5 minutes before
switching it on again. This time is necessary to allow the valves
to cool down to room temperature.
SAFETY AND MAINTENANCE
Do not open the amplifier !
High voltages are present inside. There are no user
serviceable parts inside, and all service operations should be
undertaken only by an Authorised Service Centre.
Please note that any service work or modification to the unit
carried out by unauthorised personnel may invalidate the
warranty. Refer any service queries in the first instance to your
Dealer.
Do not spill liquid into the amplifier.
If that should happen, switch off immediately and remove
the mains plug from the wall. Have the amplifier checked by an
Authorised Service Centre.
When inserting the mains plug into the wall socket or mains
outlet, make sure that the on/off switch on the unit is in the
off position.
If you do not intend to use the unit for a long period,
remove the mains plug from the mains supply.
Cleaning the amplifier
9

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Unison Research S6 and is the answer not in the manual?

Unison Research S6 Specifications

General IconGeneral
TypeIntegrated Amplifier
Amplifier ClassClass A
Frequency Response20 Hz - 30 kHz
Weight25 kg
Input Impedance47 kOhms
Signal to Noise Ratio90 dB
Output TransformerUnison Research
Speaker Outputs4, 8 Ohms
Power Consumption265W
Inputs4 x Line (RCA)

Related product manuals