Remember when connecting the loudspeaker cables to the
amplifier output terminals to respect the correct phase (red =
+/black = -) for each channel.
CONNECTION TO MAINS
Before connecting the mains cable and switching on, make
sure that your local power supply voltage corresponds to the
value shown on the rear panel of the unit.
IMPORTANT !
Never connect the amplifier to a mains supply of a different
voltage to that shown on the unit !
Mains fuses are located in the IEC mains input socket
located on the rear of the unit. The correct value is indicated on
the rear panel and also in the technical specifications at the end
of this manual.
If you need to replace a mains fuse, always use one of the
same type and rating !
OPERATION
The optimal temperature, corresponding to the best sound
performance, is reached after about 15 minutes from switching
on.
6
To Next Page
Loading...
Need help?
General
