PLACEMENT
The unit should be placed on a safe, stable surface, out of
reach of children or pets. Adequate ventilation is required above
and around the unit. Take care not to expose the unit to high
temperature or humidity.
CONNECTING INPUTS AND OUTPUTS
Situated on the rear panel of the S 6 are the input and output
sockets.
IMPORTANT !
Ensure that all other items of equipment to be connected to
the amplifier are switched off before making the
connections.
Do not insert the amplifier AC mains cord until all input
and loudspeaker connections are securely made.
To avoid the possibility of hum and noise, it is good practice
to ensure that all connections to and from the amplifier are
clean and tight, and that all cable runs are neat and tidy.
For best results, AC mains cables should not be placed
alongside signal or loudspeaker cables.
Using RCA phono interconnects of suitable quality, connect
the various sources (CD, tuner, phono) to the corresponding
inputs of the amplifier.
5
To Next Page
Loading...
Need help?
General
