UNPACKING
First of all please make sure that the carton is scaled and that
the amplifier has not suffered any damage in transit. If you
notice any signs of damage, consult your Authorised Dealer
before attempting to operate the unit.
To protect delicate parts against shocks during transport, valves
are normally packed separately.
Please refer to the fitting instructions for valves contained in
this manual .
IMPORTANT !
When unpacking an amplifier which is cold, allow it to
stand for sufficient time to reach normal room temperature
before attempting to operate it. This precaution will allow
any condensation which may have formed on the electronic
parts to fully dissipate.
Keep the original carton and packing material in a safe place.
You will need it if you have to send the unit for service or
transport it for any other reason.
VALVE FITTING
Fit the valves into their corresponding sockets following the
scheme you can see on the transformers cover and the
indications on the valves themselves which ensure the correct
orientation.
When fitting (or removing) valves, use firm but gentle
pressure. Never use force !
4
To Next Page
Loading...
Need help?
General
