EasyManuals Logo

Unit Connection Technology WS0300 User Manual

Default Icon
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background image
5
Figure 5
Close the battery door. Make sure the gasket (around the battery compartment) is
properly seated in its trace prior to closing the door. Tighten the set screw.
Note: Do not install the batteries backwards. You can permanently damage the sensors.
The solar panel does not charge the batteries, so rechargeable batteries are not needed or
recommended.
Note: We recommend installing Lithium AA batteries for sensors.
The sensor LED indicator will light for 3 seconds, and then flash once per 16 seconds
thereafter. Each time it flashes, the sensor is transmitting data.
Replace the battery door and push to tighten it.
Note: If the sensor does not power up after inserting the batteries, press the reset button
shown in Figure 6.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Unit Connection Technology WS0300 and is the answer not in the manual?

Unit Connection Technology WS0300 Specifications

General IconGeneral
BrandUnit Connection Technology
ModelWS0300
CategoryWeather Station
LanguageEnglish