EP- 45F Paper Folder Operation Manual
13.
8. Cross Folding
Note:
Note：
Cross folding can be used if, for example,
the sheet of A3-size paper folded using the
double parallel folding method is still too
large to be enclosed in envelope.
The maximum weight of paper that can be
used for cross folding is 105g/m2.
This requirement, however, varies according
to the following conditions:
Paper type; Paper size; Whether grains run
lengthways or sideways; Temperature and
relative humidity; Printing condition
The folding position may be displaced to a
greater extent than when the paper is folded
using a regular fold method, or a corner of
the folded paper may be folded inside as
indicated in the figure.
These, however, do not mean that the
machine has broken down.
(1) Adjust the paper feed roller position, so
the three rollers feed paper together.
(2) Press the crease hard using the hand.
Do not stack too many sheets of paper on
the paper feed table.
To Next Page
Loading...