Unitech MS084 - Qualifier; Input ID; Length

28
Here * and # are wild characters on the setup sheet.
Qualifier
The three core are
t ID, Length
nditional fields in the Qualifier:
d Match. Inpu an
Inp
For
Input ID is required correspond to Input ID of a formula in
order to be proces
ID1 to IDi are repre t IDs are available:
0 = Co
1 = Co
4 = UP
5 = UP
6 = I 2
7 = Co
8 = Co
= Co
= S
= MS
All I
There is no limitati IDs to be defined.
Example:
IN
Leng
Forma
in,Max,
arameters: minimum length (Min) and maximum length
When missing, the following fields of current Formula are always processed.
Example:
,48,
ut ID
mat:
IN_ID,ID1, ... ,IDi,
and the original data record must
sed.
sented by digits. The following Inpu
de 39 Full ASCII
de 39 Standard
2 = EA
3 = EA
N 13
N 8
C A
C E
of 5
dabar
de 128
9 de 93
10 2 of 5
11 I
19 = nputs
on on the number of
_ID,0,11,
What is shown above means the original data can be Code 39 or MSI.
th
t:
LEN,M
Length field consists of two length p
(Max). When defined, a formula will be performed if the length of the original data falls between
MIN and MAX.
LEN,9
What is shown above means the length of original data must be within 9 and 48.