Indication
Power on alert: After power-on the cradle it will generate an
alert signal to indicate a successful self -test.
LED indication: After each successful reading, the LED
above the imager will light up to indicate a good barcode
reading.
Beeper indication: After each successful reading, the
imager will beep buzzer to indicate a good barcode reading,
and its Beep loudness , Beep tone freq. and Beep tone
duration are adjustable.
Beep loudness/Beep tone freq./Beep tone duration: You
can adjust Beep Loudness , Beep tone and Beep duration for
a good reading upon favorite usage.
To Next Page
Loading...
