MSR120 Programmer’s Manual UDN PM010, Rev. 1.1
Section 3 -- Technical Specification 2003/1/21
Section 3 Technical Specifications
!"
Card Specifications
Card Type
ISO standard card
CA old DMV
AAMVA
JIS
Read high or low coercive magnetic stripes (300-4000oe)
Read triple track 7 BPC & 210 BPI cards
Thickness
0.76 mm #0.08 mm
Card Format
Track 1 & 3: 210 bpi
Track 2: 75/210 bpi
JIS II 210 bpi
Note: The card data output sequence for Model J2 is ISO track 2 prior to JIS II.
The card data output sequence for Model J3 is ISO track 1 & 2 prior to JIS II.
Card Operation Speed
Table 3-1. Card Operation Speed
Test Card Speed (IPS)
ISO standard card 5-55
* Jitter 5-50
** Low Amplitude 5-50
Note: *Jitter card: Reliable reading of magnetic stripes encoded with bit cell length variations within +/-12% of
normal as defined by ISO 7811.
**Low amplitude: Reliable reading of magnetic stripes encoded at 60% or more of the encoding amplitude as
defined by ISO 7811.
!"
Mechanical Specifications
Body Material
ABS 94V-0
Page 3-1
Proprietary and Confidential Total 36 pages
To Next Page
Loading...
Need help?
General
