EXPOSURE SET： Two Exposure set modes can be selected: Manual Mode and
Auto Mode.
When Auto Mode is selected, the exposure data will be adjusted automatically
according to the current light environment.
When Manual Mode is selected, you can change the exposure data.
NOTE: “Manual Mode” for Exposure and “Manual White Balance” should be used in
conjunction with each other. The exposure data is set as low as possible – the longer
the exposure time, the slower the frame rate speed).
CONTRAST & SATURATION: TOUCH and DRAG the rectangles icon on the
parameter menu bar to adjust the “Contrast” and “Saturation” values – a “Contrast”
value of 4 or less is recommended.
GRID FUNCTION： The system default setting for the grid/crossline is set to appear
on the image preview space automatically. If you want to remove the grid/crossline,
TOUCH “Off” on the Grid menu. TOUCH “On” to have the grid/crossline appear.
To Next Page
Loading...