PICTURE SIZE (PIXEL) SELECTION： The system default resolution is set to the
highest resolution of 5M Pixels (5MP) or 2592 x 1936. You can change the image size
by TOUCHING any of the other selections.
NOTE: Video mode system default resolution is set to the highest resolution of 720P
(1280 x 720). You can change the resolution to a lower setting (640 x 480) by
TOUCHING the “HD” icon on the bottom right of the TCS Pro 500 screen and
TOUCHING the D1 (640 x 480) – the “HD” button will change to “Low”. You can
change back to “HD” by TOUCHING the “Low” icon and then TOUCHING the 720P
setting.
POWER FREQUENCY SELECTION: Flicker reduction selection：Due to different
electrical frequencies in different countries, you should select the correct electrical
frequency for your country's standard. The system default is set to"60 Hz" which is the
frequency in the United States. If you select improperly you may see noise waves
moving across your screen. To change the frequency, TOUCH the desired frequency
under the "Flicker” reduction menu.
PREVIEW: TOUCH the PREVIEW icon to go into the photo gallery. Using your finger,
DRAG to glide the screen left or right to view images in the gallery. You can Share or
Delete the image, or with the “More” menu, Crop, and Rotate the image.
DOUBLE-TAP the image to enlarge it – DOUBLE-TAP the image to reduce it back to
the view size. You can also view the areas when enlarged by using your finger to drag
different areas of the image into view. To return to the Image Capture software,
TOUCH the RETURN button the right side of the pad or the Camera icon on the top
right.
To Next Page
Loading...