Unitron uDirect 3 Guide

1514
Operating distance
If uDirect  is used as a handheld
remote control (without neckloop):
• Maximum distance  cm/’’
• Hold uDirect  as shown
Button lock function
The access ( ) button on your uDirect  can
be locked to avoid inadvertent presses. To lock
the button, press and hold the connect
( )
and Home
( ) buttons simultaneously. The
power indicator light will flash red three times
to indicate that the buttons have been locked.
Press and hold the connect
( ) and Home
( ) buttons simultaneously again to unlock
the buttons.
You will still be able to answer an incoming
telephone call using the access
( ) button
while it is locked.
The power indicator is lit as long as you press
a uDirect  button. Green conrms a good
uDirect battery state, red indicates that you
need to charge the uDirect  battery.
Two minutes aer unplugging the neckloop both
indicator lights will switch o and the uDirect 
disconnects Bluetooth to save power.
Testing sound via the uDirect 
. Wear the uDirect  correctly.
. Press and hold the access (
)
button while switching on the device.
Release the access button. The audio
indicator light with turn pink.
The hearing aids will switch to the streaming
mode and you will hear the uDirect  sound
demo.
Use the volume (
) buttons to adjust the
volume.
The sound demo will stop aer three minutes
or when the access button is pressed.
Adjusting the volume during the sound demo

Unitron uDirect 3 Specifications

General

Brand	Unitron
Model	uDirect 3
Category	Hearing Aid
Language	English