EasyManua.ls Logo

Unitronics Vision V130-J Series - Physical Dimensions and Environment; Unit Dimensions, Weight, and Environment

Unitronics Vision V130-J Series
23 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VisionPLC+HMI
Unitronics
23
Dimensions
Item
V130-TRA22
V130J-TRA22
V350-TRA22
V350J-TRA22
V430J-TRA22
Size
Vxxx
109 x 114.1 x 68mm
(4.29 x 4.49 x 2.67”).
See Note 15
109 x 114.1 x 68mm
(4.29 x 4.49 x 2.67”).
See Note 15
Vxxx-J
109 x 114.1 x 66mm
(4.92 x 4.49 x 2.59”).
See Note 15
109 x 114.1 x 66mm
(4.92 x 4.49 x 2.59”).
See Note 15
136 x 105.1 x 61.3mm
(5.35 x 4.13 x 2.41”).
See Note 15
Weight
300g (10.58 oz)
325g (11.46 oz)
355g (12.52 oz)
Notes:
15. For exact dimensions, refer to the product’s Installation Guide.
Environment
Operational temperature
0 to 50ºC (32 to 122ºF)
Storage temperature
-20 to 60ºC (-4 to 140ºF)
Relative Humidity (RH)
10% to 95% (non-condensing)
Mounting method
Panel mounted (IP65/66/NEMA4X)
DIN-rail mounted (IP20/NEMA1)
Operating Altitude
2000m (6562 ft)
Shock
IEC 60068-2-27, 15G, 11ms duration
Vibration
IEC 60068-2-6, 5Hz to 8.4Hz, 3.5mm constant amplitude,
8.4Hz to 150Hz, 1G acceleration.
The information in this document reflects products at the date of printing. Unitronics reserves the right, subject to all applicable laws, at any time, at its sole
discretion, and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or
temporarily withdraw any of the forgoing from the market.
All information in this document is provided "as is" without warranty of any kind, either expressed or implied, including but not limited to any implied warranties of
merchantability, fitness for a particular purpose, or non-infringement. Unitronics assumes no responsibility for errors or omissions in the information presented in
this document. In no event shall Unitronics be liable for any special, incidental, indirect or consequential damages of any kind, or any damages whatsoever arising
out of or in connection with the use or performance of this information.
The tradenames, trademarks, logos and service marks presented in this document, including their design, are the property of Unitronics (1989) (R"G) Ltd. or other
third parties and you are not permitted to use them without the prior written consent of Unitronics or such third party as may own them
UG_V130_350_430-RA22 11/22

Related product manuals