13
Part. 14000001 Rev. 04//2021 ®/™ ©2021 Unity Laundry Systems. All rights reserved.
SPECIFICATIONS AND DIMENSIONS
2.3 GENERAL SPECIFICATIONS UTS62
MOTOR
Size – HP (KW) 3.0 (2.2)
CAPACITY
Cylinder Volume – cu. ft. (liters) 8.8 (251.3)
Cylinder Diameter – in. (mm) 30.5 (774)
Cylinder Depth – in. (mm) 21.0 (534)
Dry Load Capacity – lb. (kg) 62 (28.1)
OPERATING SPEED & EXTRACT FORCE
Washing Speed (RPM) 45-50
Maximum Extract Force (G-force) 277
Maximum Extract Speed (RPM) 800
CONNECTIVITY
USB Programmability Yes
DIMENSIONS
Depth – in. (mm) 45.4 (1152)
Width – in. (mm) 40.9 (1038)
Height – in. (mm) 58.4 (1484)
CRATED DIMENSIONS
Depth – in. (mm) 43.4 (1102)
Width – in. (mm) 48.0 (1220)
Height – in. (mm) 63.6 (1615)
APPROXIMATE WEIGHT
Uncrated – lb. (kg) 1433.2 (650)
Crated – lb. (kg) 1653.5 (750)
ELECTRICAL CONNECTION OPTIONS (VOLTS/HZ/PHASE)
208 – 240V / 50 – 60HZ / 1PH (no electrical heating) Yes
WATER HEATING OPTIONS
Hot / Cold Water Connections Only Yes
WATER, CHEMICAL DISPENSING, DRAINS
Number of Water Inlets 3
Inlet Sizes – in. (mm) 3/4 (19.0)
Manual Dispenser Compartments, Number 4
External Chemical Connections, Number 5
Dump Valve Drain Size – in. (mm) 3 (76.2)
INSTALLATION RECOMMENDATIONS
Recommended Clearance Between Machines - in (mm) 1.5 (40)
Recommended Clearance in front of Machines - in (mm) 39.4 (1000)
Recommended Clearance Behind Machines - in (mm) 31.5 (800)
To Next Page
Loading...
