Name: UNITY LAUNDRY SYSTEMS UTS40
Brand: UNITY LAUNDRY SYSTEMS
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Part. 14000001 Rev. 04//2021

USB INTERFACE

12.2 COPY PROGRAM (FORMULA) FROM USB FLASH DRIVE TO WASHER

Press [UP] or [DOWN] button to select “2:ProgFromUSB” and press [ENTER] button.

WelcometoUSB

2:ProgFromUSB

<Enter>=Conrm

Press [ENTER]buttontoconrm.ThisoperationwilluploadalloftheformulasfromUSBFLASHDRIVEtocontroller.

Press [ESC] button to cancel.

Note: The le path of parameter on USB FLASH DRIVE should be: “H:\LDXXX\PARAMETER”.“H” is the U stick

recognized on the personal computer.

12.3 COPY PARAMETER FROM WASHER TO USB FLASH DRIVE

Press [UP] or [DOWN] button to select “3:CopyParaToUSB” and press [ENTER] button.

WelcometoUSB

3:CopyParaToUSB

<Enter>=Conrm

Press [ENTER]buttontoconrm.ThisoperationwilluploadalloftheparametersfromcontrollertoUSBFLASHDRIVE.

Press [ESC] button to cancel.

Note: The parameters will be reserved under the le path: “H:\LDXXX\PARAMETER”. The existing parameters under

this le path will be covered by this one.

12.4 COPY PROGRAM (FORMULA) FROM WASHER TO USB FLASH DRIVE

Press [UP] or [DOWN] button to select “4:CopyProgToUSB” and press [ENTER] button.

WelcometoUSB

4:CopyProgToUSB

<Enter>=Conrm

Press [ENTER]buttontoconrm.ThisoperationwilldownloadalloftheformulasfromcontrollertoUSBFLASHDRIVE.

Press [ESC] button to cancel.

Note: The formulas will be reserved under the le path: “H:\LDXXX\PARAMETER”. The existing formulas under this

le path will be covered by this one.

Questions and Answers:

Need help?

Do you have a question about the UNITY LAUNDRY SYSTEMS UTS40 and is the answer not in the manual?

UNITY LAUNDRY SYSTEMS UTS40 Specifications

General