Name: UNITY LAUNDRY SYSTEMS UTS40
Brand: UNITY LAUNDRY SYSTEMS
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Part. 14000001 Rev. 04//2021

USB INTERFACE

Note: The PUNP VFD parameters will be reserved under the le path: “H:\LDXXX\PARAMETER”.The existing PUNP

inverter parameters under this le path will be replaced by this one.

The VFD installed on the machine should be made by PUNP and the parameter VFD type should be set as “PUNP”.

12.8 ALARM INFORMATION AND TOUBLE SHOOTING FOR USB OPERATION

ALARM NAME TROUBLE SHOOTING

E1: Please insert the USB Please insert the USB FLASH DRIVE again

E2:Pleasecopythele

Please check path.

Pleasecheckwhetherleexistsornot

E3:Pleasecheckthele

Pleasecheckthele.

Please contact Unity at 1-800-484-3013

E4: File read-write error

Pleasecheckthele.

Please contact Unity at 1-800-484-3013

E5: FLASH error Please contact Unity at 1-800-484-3013

E6: Backboard commu err

Please check Lines of Communication and power on again

E7: Invt commu err

E8: Invt model not match Please contact Unity at 1-800-484-3013

Questions and Answers:

Need help?

Do you have a question about the UNITY LAUNDRY SYSTEMS UTS40 and is the answer not in the manual?

UNITY LAUNDRY SYSTEMS UTS40 Specifications

General