UNITY LAUNDRY SYSTEMS UTS40 User Manual

31
Part. 14000001 Rev. 04//2021 ®/™ ©2021 Unity Laundry Systems. All rights reserved.
WASH CYCLE PROGRAMING
10.0 PROGRAMMING THE WASHER
The washer comes pre-programmed with standard wash programs. These programs have been optimized for cleaning,
gentlenessandwashcycletime.Ifneccessary,theseprogramscanbeeditedtomeetaspecicapplication.
Note: the key function as shown in the gure.
The hot, warm, cold and start buttons are used to navigate the washer menus.
Hot - Up Arrow
Warm - Down Arrow
Cold - Escape
Start - Enter
10.1 ENTERING PROGRAMMING MODE
On initial power up, the machine is in countdown mode for 10 seconds. During the countdown, press [Up]+[Down] to enter the
Functions menu. Then select “Edit Program”, and press the key [Enter] to enter the program interface and input the password
to enter the Edit Program interface. The default password is ↑ ↓ ↑ ↓ ↓ ↑ ↓ ↑ (hot warm hot warm hot warm hot warm) (1 2 1 2
1 2 1 2)
Function Menu
Edit Program
Statistics
<Esc>3S=Quit
Then select your desired program by pressing [Up] or [Down] button.
Edit
Hot
<Esc> = Quit
Esc Enter
1
2
PROGRAMMABLE CYCLES
Ciclos Programables
START
Arranque
3
Load items in washer and close door
Cargue los artículos en la lavadora y cierre la puerta
Select wash cycle
Seleccione el ciclo de lavado
Press start button
Presione el botón de arranque
INSTRUCTIONS
Instrucciones
1
3
2

UNITY LAUNDRY SYSTEMS UTS40 Specifications

General

Brand	UNITY LAUNDRY SYSTEMS
Model	UTS40
Category	Laundry Appliance
Language	English