UNITY LAUNDRY SYSTEMS UTS40 - Page 25

25
Part. 14000001 Rev. 04//2021 ®/™ ©2021 Unity Laundry Systems. All rights reserved.
1
2
PROGRAMMABLE CYCLES
Ciclos Programables
START
Arranque
3
Load items in washer and close door
Cargue los artículos en la lavadora y cierre la puerta
Select wash cycle
Seleccione el ciclo de lavado
Press start button
Presione el botón de arranque
INSTRUCTIONS
Instrucciones
1
3
2
The following are the default passwords to access the controller interface menu items.
Thedefaultfactorypasswordisforcertiedtechnicianstochangemachineparameters.
The default user password is for owner/attendents to view parameters.
The default maintenance password is for owner to change machine ID or change/check cycle history.
The following are the default passwords to access the controller interface menu items.
Default factory password: ↑ ↓ ↑ ↓ ↓ ↑ ↓ ↑ (1 2 1 2 2 1 2 1)
Default user password: ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ (2 2 2 2 2 2 2 2)
Default maintenance password: ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ (1 1 1 1 1 1 1 1)
ON-PREMISE CONTROLLER OVERIVEW